JG-1502 Filter material special cleaning agent

JG-1502: Quartz sand, anthracite, fiber ball and other filter material filter in the operation process, due to the water system of oil, mud and block pollutants will cause the filter material surface filtration increases sharply, the filter speed decreases, the operation cycle is shortened and the backwash intensity increases, and the filter tank will be paralyzed in serious cases. This product is composed of surfactants, penetrants and excellent additives, etc., the filter material on the suspended matter, crude oil, sludge cleaning effect is good, greatly improve the filter material intercepting rate, can be widely used in quartz sand, anthracite, fiber ball as a filter, to solve the filter material due to oil pollution caused by the plate, poor operation effect and other problems.
Product Features
● Suitable for all quartz sand, anthracite, activated carbon, fiber as filter material filter
● Efficient removal of microorganisms, organic deposits, mud and colloidal pollutants, extend the membrane cycleLiquid product, easy to use
● Liquid product,easy to use

Quantity:
Availability:





Inquire

Products

Product Description

Physical and chemical indicators

Appearance	Colorless to yellow liquid
PH (1% aqueous solution)	6.0±2.0
Density (20℃) g/cm³ ≥	≥0.85

Usage and dosage: According to the situation of filter material fouling, combined with other chemical cleaning and soaking, and water, steam scrubbing, the recommended dosage is 500~2000mg/L.

Reference usage: A. After the drainage filter is shut down, the water in the filter is discharged to the water level close to the submerged filter material layer. B, add medicine to close the water production valve, close the positive wash drainage valve, close the backwash exhaust valve, open the backwash drainage valve in the backwash exhaust valve branch of the manual exhaust valve connected to the hose, the other end of the hose is connected to the pump, the agent is pumped into the filter, in the pump process to constantly add water to the agent container, in order to maximize the effective pump of the agent into the filter. C, after all the soaking agents are added to the filter, open the intake valve, loosen the filter material, so that the agent is evenly distributed in the filter, and then soak. D, gas scrubbing in the process of soaking can be repeatedly air to scrub the filter material, play the cleaning effect of the agent on the filter material. E, backwash After soaking and air washing, the filter is backwashed, and the things washed down before are discharged from the filter. If the oil or other things are cleaned down for a long time, you can repeat the above steps to achieve the best treatment results. F, positive wash finally positive wash the filter until there is no foam in the positive wash drainage. G. After washing and putting into operation, you can prepare for putting into operation after the above operation.

Packaging and storage: This product is packed in plastic drums, net weight of 25 kg or 50 kg per barrel (special packing specifications to be agreed), stored in a cool and dry place with ventilation, storage period of one year.

Safety precautions: The product is an alkaline solution, and direct contact with eyes and skin should be avoided during operation. In case of accidental sticking and splashing, rinse immediately with plenty of water. If symptoms do not subside, seek medical attention.